Detailed explanation of disposable tableware equipment

The basic principles of disposable tableware equipment are as follows: Production standards Disposable tableware national standard GB180, 1-20 standard production, in line with food quality and safety. Injection molding machinery automation equipment is used for one-time molding, and the mold is directly sealed after passing through a high temperature of more than 200 degrees to produce the virus vaccine product. Disposable tableware equipment achieves sterile and dust-free work from production to packaging, which is clean and hygienic and of high quality. During the production process of disposable tableware, circulating water, mold contact, mold temperature cooling, rapid product cooling, shortened production time, and no waste water are discharged. It is very simple to apply for a QS card in accordance with the current regulations. Just go to the Environmental Protection Bureau to do an environmental assessment. Applying for a production license mainly requires the dust-free workshop of the factory, and the workshop should be decorated as required. Disposable tableware equipment with large touch screen, color display is clear at a glance, easy to understand, touch sensitive and easy to operate. The equipment is controlled by a microcomputer PLC program. The program is very simple and not as complicated as a digital lathe. The equipment has long been equipped with foreign brand Panasonic inverters, as long as the relevant product parameters and content are inserted into the touch screen. The frequency converter is also the key to the whole machine. The quality of the frequency converter determines the performance of the entire machine, and it is also a very important electrical appliance. The top of the disposable tableware equipment mold including the workbench has a bottom fixed seat, the top of the bottom fixed seat has a fixed top, and the top of the inner wall of the bottom fixed seat has a bottom shell. There is a top plate at the bottom of the inner wall of the top fixed seat, a fixed plate at the bottom of the inner wall of the workbench, and a voltage plate on one side of the fixed plate. The voltage rod is set between two fixed plates. There is an ejector pin above the voltage rod. There is a cooling pipe on the bottom fixed surface and bottom fixed tower. The electric valve has an exhaust port on both sides of the bottom and top of the mold. The disposable tableware mold manufacturing technology is special. During the entire system operation cycle, the flow of hydraulic cylinders such as the clamping cylinder and the injection cylinder changes greatly, and the system compression time will be extended after the fixture is injected. In order to rationally utilize energy, the system adopts a dual refueling method with a pump. When the hydraulic cylinder moves quickly (low pressure flow), dual hydraulic pumps are used to supply oil. When the hydraulic cylinder moves slowly or maintains pressure, a high-pressure pump and a small flow rate are used to deliver oil, and a low-pressure and large-flow pump is used to deliver oil. The raw material of disposable tableware is PP polypropylene raw material particles. Through polymer penetration and microbial degradation technology, the environmental protection concept is effectively integrated into the product, and harmful components in plastics are effectively removed. Disposable tableware has changed from foam lunch boxes to environmentally friendly lunch boxes. Originally foam lunch boxes could not withstand high temperatures and caused damage to the environment during the production process. Plastic lunch boxes, paper lunch boxes, wooden lunch boxes, decomposing lunch boxes, etc. Among them, plastic has the characteristics of low toxicity, high melting point, strong plasticity, simple production, and relatively low cost, and has become the mainstream material for the production of disposable tableware. PP polypropylene has mechanical and thermal properties and is suitable for food packaging. Disposable tableware uses an automatic production process to automatically launch the product without manual extraction. The product is formed quickly and has good safety performance. One person can protect multiple devices. Through disposable tableware molds and precision disposable tableware equipment, PP polypropylene raw material particles are made into 260-degree high-temperature disposable injection molding aseptic packaging that automatically flows after ultraviolet sterilization and disinfection. This kind of imitation disposable tableware is novel in style, environmentally friendly, lightweight, and has 2 to 5 times the collision resistance of similar plastic products. Its temperature resistance is better than 120 and low to -20. Its design style is simple and unified, making it easier for the catering industry to standardize the use and management of tableware. Disposable lunch boxes made of plastic mainly include PP polypropylene and PS. They are non-toxic, tasteless and tasteless, and PP is soft. Generally, the use temperature of PP is between -6 and 120 degrees, so it can be heated in a microwave oven or cooked in a steam cabinet. The use temperature of modified PP can be controlled between -18 degrees and 120 degrees.