Precautions and advantages of using pulp molding equipment

Technology has promoted industry changes. For the thermal packaging industry, traditional wooden and plastic packaging products can no longer meet market demand in the long run, and are also incompatible with the country's sustainable development strategy and environmental protection policy. Therefore, new pulp molding equipment came into being. So, let’s learn about the precautions and advantages of using pulp molding equipment.

Pulp molding equipment is different from conventional molding equipment. Shuanghuan breaks the dilemma of single mold manufacturing and avoids manufacturers purchasing multiple sets of molding equipment due to the need to supply multiple different molds. Pulp molding equipment has the capability of multi-line production. One set of machines can produce many different types of splicer products by simply changing the molds of the corresponding products. Our pulp molding equipment has formed an automated production line. In daily use, you need to pay attention to the following related matters: 1. The mold is often constantly rubbed due to frequent use during operation. Then, in order to reduce the friction between the mold and the equipment and extend the service life of the mold, our employees must provide good lubricating oil to the mold before use to avoid damage to the mold caused by overuse; 2. Direct contact with the prepared pulp in the mold is prohibited during the molding process. If you want to check the progress of the mold molding, you must stop the machine operation before performing relevant inspections to avoid damage from being involved in the machine by hands during operation; 3. After the pulp in the mold is successfully removed, we need to carefully clean the original mold. For example: if there is pulp residue on the inner wall of the mold, clean it in time and apply anti-rust oil to prevent the mold from rusting; 4. In the daily work of pulp molding equipment, special tools such as special plywood and special trailers must be used to pick up, place and stack products; 5. When the mold is not used, we need to perform mold-related measurements and record real-time data. This is to conduct a loss analysis on the mold to avoid excessive incoming and outgoing of finished products and marking parts due to excessive mold loss, and to ensure that the quality of the splicer products produced is within the acceptable range. What are the advantages of pulp molding equipment? 1. The raw material for pulp molding is waste paper, including cardboard, old carton paper, waste white edge paper, etc., which come from a wide range of sources. 2. The pulping process is completed by pulping, adsorption molding, drying and molding and other processes, and is environmentally friendly. 3. Pulp molding equipment can be recycled; its volume is smaller than foam plastics and can be overlapped, making it easier to transport. 4. Can be combined with a variety of materials to improve protection function. Composite with aluminum foil, plastic and other materials, it can prevent the content from deterioration and corruption. The above introduces the precautions and advantages of using pulp molding equipment. If you want to know more, you can contact us at any time! Our company has many years of experience and we are always looking forward to your joining.